ชื่อเรื่อง : การผลิตไวต์แวต์โปร่งแสงที่ใช้ดินเหนียวน้อยเป็นวัตถุดิบก่อนทำการเผาโดยวิธีการเทแบบ

ผู้แต่ง : Capogh A.; Taskiran, M.U.

แหล่งข้อมูล : Key Engineering Materials 2004, 264-268(Pt. 2, Euro Ceramics VIII), 1621-1624 (Eng).

บทคัดย่อ (อังกฤษ) : A low – clay translucent white ware was formulated and the studies were carried out to establish the necessary conductions required for different white ware manufg. processes, such as slip casting. The aim of the present work is to identify the condition for prepn. Of stable low-clay white ware slips with high solids content for the prodn. Of slip-cast objects with improved properties, as well as establish a relation between the slip properties and the final object properties. The slips contg. 88% non-plastic pre-fired materials and 12% clay mixts. were prepd. and the effects of type and amt. of various com. de flocculants and solids content on the casting behavior were investigated. For each deflocculant there exists an optimum concn. ranger within which low viscosity is achieved for a slip of high solids content The addn. of 0.1% Dolaflux SP NEU com. deflocculant was enough to reduce the viscosity at a level required for successful casting. Casting trials showed that combination of high slip solids content and slower casting rate results in objects with higher densities both in the green and fired state. For instance, the casting time of 8 min was enough to produce approx. 5 mm. wall thickness at 47.5 vol.% solids content.

บทคัดย่อ (ไทย) : ไวต์แวร์โปร่งแสงที่ใช้ปริมาณดินเหนียวน้อยถูกนำมาศึกษาเพื่อผลิตเป็นไวต์แวร์แบบต่างๆ โดยใช้กระบวนการเทแบบ (slip casting) จุดประสงค์ของงานในครั้งนี้เพื่อศึกษาสภาวะในการเตรียมไวต์แวร์โปร่งแสงที่ใช้ปริมาณดินเหนียวน้อยและมีปริมาณเนื้อสาร(solids content) ที่สูง การเทแบบมีวัตถุประสงค์ช่วยในการปรับปรุงคุณสมบัติและหาความสัมพันธ์ของคุณสมบัติการเทแบบและผลผลิตสุดท้ายที่ได้ ส่วนผสมที่ใช้ในการเทแบบประกอบด้วย วัสดุที่ไม่เป็นพลาสติกและยังไม่ถูกเผา (non-plastic pre-fired materials) 88%และส่วนผสมของดินเหนียว (clay mixtures) 12% ชนิดและปริมาณของสารก่อตะกอน (deflocculant) และปริมาณเนื้อสาร (solids content) มีผลต่อการเทแบบ สารก่อตะกอนแต่ละตัวจะนำมาหาความเข้มข้นที่เหมาะสม ส่วนผสมที่เทต้องมีความหนืดต่ำ (low viscosity) เพื่อให้ได้ผลผลิตที่มีปริมาณเนื้อสารสูง การเติม 0.1% Dolaflux SP NEU (ชื่อทางการค้า) สามารถช่วยลดความหนืดในการเทแบบได้ ซึ่งการเทแบบต้องใช้ปริมาณเนื้อสารมากและอัตราเร็วในการเทต่ำเพื่อให้ได้ผลผลิตที่มีความหนาแน่นสูงขึ้นเมื่ออยู่ในขั้นตอน green state และขั้นตอนการเผา (fired state) ตัวอย่างที่ได้จากการทดสอบใช้เวลานาน 8 นาที ได้ความหนาประมาณ 5 มิลลิเมตร และมีปริมาณเนื้อสาร 47.5%

ชนิดวัสดุเหลือใช้ : ceramic

ประเภทเอกสาร : journal

หมายเลขอ้างอิง : 142:434422d